New Type Ti-R Titanium Muffler for Ignis Sport - SUZUKI SPORT Racing News Release

-SUZUKI SPORT Racing

New Type Ti-R Titanium Muffler for Ignis Sport

The R&D department of which is in charge of Ignis Sport has been trying to increase performance of the high compression, high response M15A. Light weight chrome molybdenum flywheel, metal clutch, low drag air cleaner are the ones which makes this happen, and the next step was to make better exhaust system.

Suzuki Sport has done research with the engine department in order to make good exhaust system which matches to the M15A variable valve timing. We have looked into details of when accelerating from the corners and diving into tight corners with heal & toe.
You can realize the difference from when you start the engine. It will sound as if the engine has been done a fine tuning.

【Specification】

Full titanium construction
In order to accomplish the strength and light weight, aviation material titanium has been chosen. Even though it has 60mm diameter, it is 50% lighter than the genuine exhaust system. Also the material makes the looks of the product special.

Full straight layout
The target was to achieve high performance at high rpm. To make less exhaust resistance, it has become full straight layout. Straight silencer, under axle layout, and center tail end fixing.

Part	Specification	Part no.	Price
Type Ti-R Muffler	Standard	243520-4350	Finished Sales
Type Ti-R Muffler	Grinding option	243530-4350	JPY 171,000

Application
Car	Year	Model	Engine
Ignis Sport	2003 June	HT81S	M15A

【Specification】
Main pipe diameter	Dia:60.5mm
Tale end diameter	Dia:90mm
Material	Pipe：Titanium
Material	Silencer：Titanium
Silencer construction	Straight silencer
Noise level Inside ( ) is with inner silencer attached	About 105dB (94dB)
Weight Inside ( ) is genuine	Front pipe：1.7kg (4.8kg)
	Rear muffler：4.2kg (8.5kg)
	Total：5.9kg (13.3kg)

※The system goes under the rear axle, the suspension rebound stroke needs to be limited. Either fitting Suzuki Sport Height Adjustable Suspension or change the rear damper to maximum length of 340mm or shorter.

※To fit this exhaust system, the rear toe hook will not be able to use. If you need the rear toe hook, please purchase the rear hook replacement kit. (Under development)

At the tail end of muffler, 4 steps (coarse to fine) grinding + gas burner treatment has been done in order to give gradation.

■ Option parts

Rear bumper lid
Part no.	Material	Finish	Price
719110-4350	FRP*	White gel coated	JPY 7,800
719120-4350	Carbon	Carbon	JPY 9,800

*Needs to be painted


Carbon rear bumper lid attached sample Click the picture to enlarge		FRP rear bumper lid attached sample Click the picture to enlarge

Inner silencer
Part no.	Price
248510-4350	JPY 5,800

※Stainless material

Rear toe hook replacement kit
Part no.	Price
798100-4350	Under development

CAUTION
*Application and model year which is shown on this list is based on Japan domestic market model. There maybe a possibility of not able to be fitted on to overseas market models.
*Since our product was developed for competition use, unless the product was different from the order or the condition of the product is not in good shape, we can not accept any claims on order to replace or pay back for the purchased merchandise. Also, in order to fit the parts, the manufacturer/dealer warrantee will may become invalid. Please contact your local dealer for further information.
*Becareful of fitting parts as it may violate the regulation of using them on public roads on each different country.
*Additional cost will be added to the product price. (Packaging, handling charge, custome clearance charge, etc.)
*The parts specification and price may vary without prior notification.
*Basically we do not have guarantee or do not accept claims since all the products are motorsport parts.
*Product prices are indicated in Japanese Yen.